We supply 5083 O Aluminium Alloy Sheets & Plates in India for shipbuilding, transport equipment, pressure vessels, welded structures and other applications where Aluminium Alloy 5083 in the O temper is specified. Our product range includes 5083 O aluminium sheets and plates in different thicknesses and dimensions, with material supplied against the applicable standard and purchase specification.
5083 O is available in flat-rolled sheet and plate forms. When sending an enquiry, customers can specify the required thickness, width, length, quantity and material standard so the correct 5083 O Aluminium Sheet or Plate can be quoted.
5083 O Aluminium Sheets & Plates
Our range of Aluminium 5083 O Sheets & Plates is intended for customers looking for the specific 5083 alloy and O temper rather than generic 5083 material. The product is supplied as flat-rolled sheet or plate, depending on the required thickness and dimensions.
5083 is also identified under designations including UNS A95083, EN AW-5083 and WNr. 3.3547, with the alloy commonly designated as AlMg4.5Mn0.7 under European standards.
Typical product requirements include:
- 5083 O Aluminium Sheets
- 5083 O Aluminium Plates
- Aluminium Alloy 5083 O Sheet
- Aluminium Alloy 5083 O Plate
- EN AW-5083 O Sheets & Plates
- UNS A95083 Aluminium Material
- ASTM B209 Aluminium 5083 Sheet & Plate
The alloy, temper and dimensions should be specified together when requesting material, particularly where the purchase order or engineering drawing calls specifically for 5083 O.
5083 O Aluminium Sheets & Plates Specifications
| Specification | Details |
|---|---|
| Alloy | Aluminium Alloy 5083 |
| Temper | O |
| Product Form | Sheets & Plates |
| ASTM Specification | ASTM B209 / ASME SB209, where applicable |
| European Alloy Designation | EN AW-5083 |
| UNS | A95083 |
| Werkstoff Number | 3.3547 |
| Alloy Designation | AlMg4.5Mn / AlMg4.5Mn0.7 |
| Supply Form | Flat-rolled Sheet & Plate |
| Surface | Mill finish or specified surface condition |
The published technical references for 5083 O/H111 sheet and plate identify sheet and plate as the principal supplied forms, with mechanical requirements varying according to thickness.
Available Sizes of 5083 O Aluminium Sheets & Plates
5083 O Aluminium material can be ordered as sheet or plate according to the dimensions required for the application. Standard stock sizes vary between suppliers and mills, so the requested thickness, width and length should be included in the enquiry.
Published stock ranges from specialist aluminium suppliers include sheet dimensions such as 2000 × 1000 mm, 2500 × 1250 mm and 3000 × 1500 mm, along with larger plate formats including 4000 × 2000 mm and 6000 × 2000 mm. Actual availability depends on the required thickness, temper and supply source.
For quotation, please specify:
- Required thickness
- Required width
- Required length
- Sheet or plate form
- 5083 O temper
- Applicable material standard
- Quantity required
- Cut-size requirement, if applicable
- Material certification or inspection requirement
Providing the complete requirement helps ensure that the quotation is prepared for the correct 5083 O Aluminium Sheet or 5083 O Aluminium Plate.
Standard Specifications for 5083 O Aluminium Sheets & Plates
| Standard / Designation | Details |
|---|---|
| ASTM B209 / ASME SB209 | Aluminium and aluminium-alloy sheet and plate specification, where applicable |
| EN 485-2 | Mechanical property requirements for aluminium and aluminium alloy sheet, strip and plate |
| EN 573-3 | Chemical composition and form of wrought aluminium alloys |
| EN AW-5083 | European designation for Aluminium Alloy 5083 |
| UNS A95083 | Unified Numbering System designation for Aluminium Alloy 5083 |
| WNr. 3.3547 | Werkstoff material designation |
Aluminium 5083 O Equivalent Grades
| Standard | Designation |
|---|---|
| European | EN AW-5083 |
| UNS | A95083 |
| WNr. | 3.3547 |
| ISO | AlMg4.5Mn |
| DIN / Material Designation | AlMg4.5Mn0.7 |
| Old Designation | GM41 / AG4.5MC* |
Chemical Composition of Aluminium 5083 O Sheets & Plates
| Al | Si | Fe | Cu | Mn | Cr | Mg | Ti | Zn | Other Each | Others Total |
|---|---|---|---|---|---|---|---|---|---|---|
| Balance | 0.40 max | 0.40 max | 0.10 max | 0.40–1.00 | 0.05–0.25 | 4.00–4.90 | 0.15 max | 0.25 max | 0.05 max | 0.15 max |
Mechanical Properties of 5083 O Aluminium Sheets & Plates
| Product Form / Thickness | Proof / Yield Strength | Tensile Strength | Hardness | Elongation |
|---|---|---|---|---|
| Sheet: 0.2–6.3 mm | ≥125 MPa | 275–350 MPa | 75 HB | As applicable to thickness |
| Plate: 6.3–80 mm | ≥115 MPa | 270–345 MPa | 75 HB | As applicable to thickness |
| Plate: 80–120 mm | ≥110 MPa | ≥260 MPa | 70 HB | ≥12% |
5083 O Aluminium Sheets & Plates Applications
5083 O Aluminium Sheets & Plates are used where Aluminium Alloy 5083 in the O temper is specified in the material requirement. The product is used across marine, transport and heavy-duty equipment applications.
Common applications include:
- Shipbuilding and marine structures
- Boat and vessel components
- Pressure vessels
- Rail cars and rolling stock
- Vehicle and truck bodies
- Tip truck bodies
- Mine skips and cages
- Welded aluminium structures
- Tanks and fabricated equipment
- Large aluminium panels and structural sections
5083 O Aluminium Sheet & Plate Supplier in India
As a supplier and stockist of 5083 O Aluminium Alloy Sheets & Plates in India, we support enquiries for standard, bulk and dimension-specific material requirements.
To request a quotation, provide the complete product requirement, including:
- Product: 5083 O Aluminium Sheet or Plate
- Thickness
- Width
- Length
- Quantity
- Applicable ASTM, ASME or EN specification
- Required test certificate
- Cut-to-size requirement, if required
This allows the material requirement to be matched against the correct 5083 alloy, O temper, product form and requested dimensions.